Free Ship Plan: Lettie G. Howard

Lettie G. Howard  under sail, photo by Nelson Micheal Chin

Lettie G. Howard sail plan

The last existing clipper-bowed inshore Fredonia model fishing schooner,  Lettie G. Howard was surveyed in 1989 for the Historic American Engineering Record (HAER), which documents historically significant engineering, industrial, and maritime works in the U.S. The project is administered by the National Park Service, U.S. Department of the Interior. The drawings and photos from that survey are maintained by the Library of Congress, and we offer them at TheModelShipwright.com:
Lettie G. Howard Plan Page
Lettie G. Howard Photo Gallery

Free Ship Plan: Gokstad Viking Longboat

Plan of Gokstad Viking Longship from Ancient and Modern Ships

For generations, the sight of a Viking longship sail on the horizon sent chills of fear down the spines of Medieval Europeans. However, Viking longships were used by Scandinavian mariners for everything from commerce to exploration in addition to warfare. Vikings used them to discover new lands to settle in Iceland and Greenland, and it appears they reached the shores of North America hundreds of years before Christopher Columbus.

Our Viking longship plan comes from Ancient and Modern Ships by Sir George Charles Vincent Holmes, published in 1906. Holmes Took from Transactions of the Institution of Naval Architects, Vol. xxii, from a paper by noted naval architect Colin Archer. This particular smaller Viking longship was discovered in 1880 in a grave at Gokstad near Sandefjord at the entrance of the Fjord of Christiana. Built entirely of oak, she was 77 ft. 11 inches in length, extreme breadth 16 ft. 7 inches, depth from top of keel to gunwale 5 ft 9 inches.

Free Ship Plan: New York Pilot Schooner

New York Pilot Schooner lines plan from Desmond's Wooden Ship Building

This New York Pilot Schooner is another plan from Desmond's Wooden Ship Building. These boats share a lot in common with the Baltimore Clipper Schooner in hull shape. Especially in the "drag" of the keel: The ship sits much deeper at the stern than at the bow. One way in which they differ from their ancestor is the bow is much more plumb. Baltimore Clippers tended to have the outward curving bow of a cutter.

This would work up into a nice ship model. Because of the fairly small size of the prototype New York Pilot Boats, model ships can be built to a fairly large scale without resulting in a model too big for display in the average home.

The fore-aft rig of the schooner also simplifies the task of rigging this model ship, but still provides a very salty-looking result. Scratch-building a model of this ship is a good way to develop model shipbuilding skills needed for a larger project, such as a tea clipper of ship of the line, and allows the model builder to see results much more quickly.